Logo Made in Germany
presented by Logo BMWi
in cooperation with Logo AUMA
Key-Visual Trenchless Asia 2018

Trenchless Asia 2018

7 – 8 May 2018 – Kuala Lumpur, Malaysia

Meet 20 German companies

Welcome to the German Pavilion at Trenchless Asia 2018!

10th International Exhibition and Conference on Trenchless Technology

Trenchless Asia 2018
7 – 8 May 2018 
Kuala Lumpur, Malaysia

Welcome to the presentation of the Federal Republic of Germany!

For the Federal Republic, economic cooperation with other countries and people is important, and is the reason for Germany's participation in this event. The Federal Republic of Germany enables through this official presentation 18 companies to take part in a joint pavilion "made in Germany". The German Pavilion will provide a good overview on the further development of techniques for trenchless methods and the rehabilitation of supply and sewage lines. All interested persons are invited to visit the German Pavilion, which will be located in Kuala Lumpur Convention Centre.

There was a lot of effort put in preparing the booth. A communication and informational lounge area will enable interesting conversations and discussions. The object is to explain Germany's latest techniques and to exchange trends or experiences and to support international cooperation within the economy. On behalf of the German exhibitors the Federal Ministry for Economic Affairs and Energy (BMWI), the Association of the German Trade Fair Industry (AUMA) and the German Society for Trenchless Technology e.V. (GSTT) welcome you to the Official German Presentation at the Trenchless Asia 2018.



Exhibitors at the German Pavilion


IBG Hydro Tech GmbH
HydroCut 150 ( self driven Cutting Robot)
Booth number: 105

Main Jacking Cylinders
Booth number: 112

Bohrtec GmbH
BM 800-LS & FS 813 DTH / Long Frame Machine
Booth number: 87

KARL WEISS Technologies GmbH
starline® installation Equipment
Booth number: 111

Rädlinger primus line GmbH
Primus Line End fittings
Booth number: 100

View all German exhibitors and products

News & Innovations

Australia: Rehabilitation of critical water main infrastructure for Sydney Water
Q2 2017: Sydney Water Corporation (SWC) is a New South Wales owned government corporation responsible in providing safe drinking water and sanitation services to over 5 million Sydney residents. In January 2017, SWC approached Primus Line in regards to the rehabilitation of two critical trunk ma... | Further reading

Bohrtec Front Steer system in combination with a DTH hammer
The Bohrtec Front Steer system in combination with a DTH hammer and optical guidance system is the first and only machine worldwide which is capable to install small product pipes from 400 mm up to 800 mm with an accuracy of +-30 mm on distances up to 100 m in very difficult inhomogeneous ground ... | Further reading

Guided Auger boring in Granite Rock Fill and Bedrock up to 250 MPa
Guided Auger boring in Granite Rock Fill and Bedrock up to 250 MPa Within the Hong Kong Link Road (HKLR) project the Airport Express Link (AEL) rails had to be under crossed by two tunnels with multiple lanes. To avoid settlements it was decided to jack OD 813 mm steel pipes to create two pipe ro... | Further reading

News & Innovations
Your personal organizer

Your personal organizer

Print list
Herrenknecht AG
Booth number: 106